KTS 990

Control unit diagnosis: KTS 990

KTS 990 - Professional and flexible vehicle analysis

 
Content
  • Information

    KTS 990: Package with DCU 220, KTS 540 and FSA 500 – advantageous module concept with wireless link to the PC system

    • Positioning of the FSA 500 module in the engine compartment
    • Convenient adaptation with short sensor lines
    • Positioning of the SD module in the vehicle interior
    • Mobile working with the Convertible-PC DCU 220

    The mobile test system for electrics and electronics diagnostics:

    The handy FSA 500 from Bosch forms the perfect basis for cost-effective vehicle system analysis. The batterydriven measuring module has a wireless link to the Convertible PC. Its main strengths include easy testing of all important electric and electronic components and the convenient display of actual values from ECU diagnosis (KTS module). A large number of practical equipment details make KTS 990 a safe investment.

    Advantages of fast engine tests Equipment for cost-effective use:

    • Compact, battery-driven measurement module with wireless link to the convertible PC DCU 220
    • Software for testing the most important electrical and electronic components
    • Time-saving testing while components remain in the car
    • Over 30 preset component tests
    • Signal generator simulates sensor signals
    • Measurement of battery no-load for up to 24 hours
    • Universal oscilloscope with 2-channel (2 x 40 MS/s) and 4-channel mode (4 x 1 MS/s)
    • Testing of vehicle bus systems (e.g. CAN)
    • Importing and saving comparative curves
    • Proper engine test functions

     
  • Technical data

    DCU 220  
    Processor Intel Core i5-4200U, 1.6GHz (2.6GHz)
    RAM 4 GB DDR3L, expandable to 8 GB
    Storage 256 GB SSD
    Display 11.6”, sunlight readable
    (800 Nits), 1366 x 768 Pixel
    Touchscreen Capacitive multi-touch
    Battery 2 x 24W, hot-swappable
    Wireless WLAN IEEE 802.11ac and Bluetooth 4.0 class 1 (high performance)
    Interfaces 2 x USB3.0, 1 x USB2.0
    Gigabit LAN RJ45
    HDMI_Audio
    Webcam HD
    OS Windows 7 Professional 64 Bit

    KTS 540  
    KTS 540 1-channel multimeter
    Connections OBD diagnostic cable, USB, Bluetooth, power supply unit, operating display
    Weight approx. 0.5 kg

    FSA 500
    Power supply rating 90 – 254VAC/47 – 63 Hz
    Operating temperature 5°C to 40°C
    Bluetooth range Min 30m with line of sight
    Dimensions (W x H x D) 290 x 220 x 110 mm
    Battery life Ca 4h
    Weight 1.5 kg
    Universal oscilloscope  
    Sampling rate 2 channels 40 Ms/s
    Sampling rate 4 channels 1 Ms/s
    Voltage range +/- 0V to +/-200V
    Current measurements 10mA to 30A (30A - probe)
    0.1A to 1000A (1000A - probe)
    Ignition analysis  
    Primary voltage 20V to 500V
    Secondary voltage 5KV to 50KV
    Signal generator  
    Signal forms DC, Sine, triangular, Square,
    Frequency 1Hz to 1000Hz
    Pulse width Einstellungsbereich 10% to 90%
    Amplitude -10V to +12V (rel. ground)
    Max output current max. 50 mA
    Resolution 8 Bit (256 Steps)
    Overload protection automatic

     
  • Accessories

    Special accessory Order number
    Tire valves programming device TPA 200 0 684 400 250
    Docking station DCU220 1 687 023 744
    Installation kit for docking station 1 681 038 396
    Trolley 1 688 003 246
    Monitor kit for DCU 220 on trolley 1 687 001 987
    Battery charging station DCU 220 1 687 335 046
    Compensation battery DCU 220 1 687 335 047
    Provision (cigarette lighter) DCU 220 1 684 465 686
    Ink jet printer (incl. WLAN & USB) 1 687 001 850

     
  • Scope of delivery

    Scope of delivery KTS 540:

    • KTS 540 unit
    • OBD diagnostic cable 1,5 m
    • Universal adapter cable
    • Measuring cable, test probes and terminal connectors
    • Mounting KTS
    • Power supply unit
    • Bluetooth USB-adapter
    • USB connecting cable 3 m
    • DVDs ESI[tronic]
    • Case
    • Operating instructions KTS

    Scope of delivery DCU 220:

    • DCU 220 Convertible-PC with carrying handle
    • Storage batteries (2x)
    • External DVD drive mit USB connecting cable
    • Power supply unit (19V/3.4A)
    • Power supply cable
    • Stylus with string
    • Case
    • Operating instructions DCU 220

    Scope of delivery FSA 500:

    • Storage case
    • Power supply unit with power cord (100 – 240 V~ / 50 – 60 Hz)
    • USB cable
    • SystemSoft[plus] system software
    • Connecting cable Multi 1 / Multi 2 and B+ / B-
    • Connecting cable term. 1 / 15 (Uni cable II)
    • Clip-on trigger
    • Current probe 1000 A
    • Oil temperature sensor
    • Air pressure measurement with hose
    • Universal KV probe
    • Remote control button

     
 
 

For the full functionality of this website cookies are needed. Please activate cookies and refresh your browser. After the refresh a cookie management dialog will be shown.

This website uses cookies for functional, comfort and statistics purposes. You can change this setting at any time by clicking on "change settings". If you consent to this use of cookies please click "Yes, I agree".